How to Remove Your MG Wipers - Service Mode

Applies to: MG3, MG4, MG5, MG ZS, MG HS, MG Cyberster

On many MG models, the wipers park beneath the bonnet edge. Do not force the arms upwards. Put them into service mode first, then they are easy to reach.

How to Activate MG Wiper Service Mode

1. Turn your car off.
   
2. Within 15 seconds, push and hold the wiper stalk in the wash/wipe position for about 3 to 5 seconds until the wipers move to a vertical service position.
   
3. You can now change the blades.
   
4. To lower the wipers again, turn the car on and activate the wipers once.

Just one quick check

MG service mode activation can vary between specific models and model years. If the above sequence does not trigger on the car, check your owner's manual or enter your registration at wiperz.ie — we will confirm the correct process for your specific MG model and year.

Make Sure the Blades Fit

Wiper sizes and fittings can change between versions of the same model. Enter your registration and we'll match your car with the correct front and rear blades.

We’ll also send the fitting video and any service-mode steps your car needs. Open the box and you’re ready to go.

Find the right wipers for your MG →